Cleaning & Maintenance Products


Creative Resins Distribution are resin specialists and added to our range is the AGlaze range of products. This product range is a world leader in its ability to clean and seal all sorts of surfaces including teak, glass, aluminium and GRP. Creative Resins distribute the whole AGlaze range from our premises in Kent. New products in the range include our industrial glass cleaner which we recommend using before applying our spraycoat range.

Glass Cleaners

The new industrial glass cleaner comes in a handy 750ml trigger spray. It can be used on glass and polycarbonate and is ideal for cleaning glass before using the resin outlines or spray systems. It can be applied using a soft cloth or tissue. This new product is receiving excellent reviews worldwide as it is a strong cleaner. Also available in 20 litres or as an own label product. Use before spraying especially before spraying the mirror resins.

Crystal Vision Glass Sealant

Crystal vision is a glass sealant which enables water to bead on the glass and therefore run off the glass quicker. Applied like a regular glass cleaner, crystal vision stops rain spots and water spots forming on the glass. Crystal vision needs to be applied twice a year. 250ml crystal vision will cover approximately 12 sqm of glass.

Solar Panel Kit

Dirty solar panels have a negative impact on their performance – in some cases loosing up to 30% of their efficiency. It has been proven that maintaining solar panels allow them to run at their optimum performance. The solar panel kit enables the solar panel to remain cleaner for longer maximising the light getting into the solar parts and increasing your financial reward.

UPVC Frame Kit

The UPVC kit consists of a years’ maintenance products for a house/conservatory.

500ml shampoo enables the conservatory, doors or frames to be washed, 500ml preparation and a microfibre cloth allows for them to be cleaned and the surface prepared ready for sealing. 2 x 100ml frame sealants then allow for all the UPVC to be sealed and protected for a year. This reduces staining from tree sap, bird acid and general dirt and grime.

Shower Kit

A handy shower kit pack to clean and seal all shower cubicles in glass or polycarbonate. Contains an Eradicator sponge to remove any lime scale and stubborn stains. Once the glass and ceramic are as clean as possible, use the Crystal Vision 100mle and the soft cloth to apply all over the glass/polycarbonate. Needs to be reapplied every 6 months.

Eradicator Sponges

Miracle Eraser foam block containing the strongest melamine fibre content. When dampened with a tiny amount of water, the Eradicator sponge can remove even the most stubborn stains previously immovable. The Eradicator is chemical free, environmentally friendly and easy to store when not in use. It comes in a handy re-sealable plastic wallet. By gently rubbing the eradicator over a mark/stain, its melamine fibres break down the stain and remove it. Gradually the sponge will start to break and can be thrown away.

The Eradicator sponges really do remove most stains from most surfaces. In the glass industry they are used to remove white chalk writing from glass and when used dry over sandblasted glass they will take off oily finger prints. They can also be used to remove stains from UPVC frames. The commercial Eradicator is shipped worldwide and can be purchased in a pack of 4 sponges or in bulk cartons. Please note these are the commercial strength sponges and not home strength as found in supermarkets and DIY stores. Excellent to use with the premium glass cleaner to completely strip glass of any dirt and grime.

Stainless Steel Solutions

Stainless Steel Polish can be used for oxidised stainless steel and metals to remove the rust marks from the surface and to restore the surface back to normal.

Once older stainless steel has been polished to remove any oxidisation, the Stainless Steel Sealant can be applied to stop the oxidisation from returning. Alternatively on new stainless steel, the sealant can be applied immediately to stop any future oxidisation

Teak Care

Teak cleaner kits from Creative Resins has been specially formulated for us by Teak specialists. This new system can be used on any teak decking or furniture. Grey, dull areas can now be transformed back to its original form when new.

Process 1 – A cleaning solution which will clean deep into the surface of the teak without harming the timber.

Process 2 – A neutralizing solution is then applied to finish the cleaning process and neutralizing process 1.

The teak is then washed with clean, fresh water and allowed to thoroughly dry. All teak products including garden furniture, decking, flooring etc can be cleaned to look brand new.